- ArKco



	Power Supply Selection Simplified

	the right power solution for your application in minutes.
	Our online Product Selector and Configuration Tool helps system designers quickly identify the best-fit power solution for their application. Simply enter key requirements such as supply type, safety approval, outputs, voltage and current to receive optimised recommendations based on the fewest components and lowest estimated cost. Results can then be refined by cooling method, classification and design features for faster, easier comparison.

EIRE600

600W Open Frame AC/DC Power Series

The EIRE series provides superior cooling options with its best-in-class power density exceeding 36.3W/in³ and efficiency reaching up to 96%, significantly minimising power losses and enabling it to outperform all other products available on the market. The EIRE600 delivers its full 600W and up to 750W of peak output power for 3 seconds with either forced-air or conduction cooling or up to 450W using natural convection at 115V_AC in a small 5” x 3” footprint with an ultra-low 1.1” profile. The series is designed for both industrial and medical applications and provides 2 MOPP isolation, BF-rated output and supports both Class I and II installations.

EIRE300

300W Open Frame AC/DC Power Series

The EIRE300 is a single output power supply delivering 300 Watts, and up to 375 Watts of peak output power for 1 second when fan cooled in a small 4” x 2” x 1” low profile footprint. With an unrivalled convection rating of 200 Watts (115V_AC), it is the ultimate power solution for Class I and II applications where reliability, high efficiency and BF rating are important factors.

Digital Enabled Output Modules & Digital DevKit for NEVO+

New Digitally Enabled Output Modules for
NEVO+ 600W and 1200W Configurable AC/DC Power Series.

To accelerate end-user development and minimise the complexity of working directly with PMBus™, Vox Power also releases an open-source Digital Development Kit defaulting to SCPI/web-based control via Vox Power’s web-interface tool.
The new user-friendly online Product Selector and Configuration Tool makes it easy to compare, configure, and select the power solution best suited to specific applications and power requirements.
Open-source SCPI/Web control for Digitally Enabled Output Modules.

The NEVO+ user-configurable series is the smallest in its class and the ultimate power solution for demanding applications where size, power density and weight are vital factors. It offers multiple output voltages and power options that can be configured in minutes to suit virtually any application.

NEVO+600

600W Modular AC/DC Power Series

The NEVO+600 delivers 600 Watts from a tiny 5" x 3" x 1.61" package weighing only 600g when fully configured. The input module can accommodate up to four isolated output modules, ranging from 75 Watts dual output to 150 Watts or 300 Watts single output, which can easily be configured into a high power 5" x 3" single output power supply or a multiple output power supply with up to eight isolated outputs.

NEVO+1200

1200W Modular AC/DC Power Series

The NEVO+1200 delivers 1200 Watts from a 6" x 6" x 1.61" package weighing only 1.2kg when fully configured. Each configured unit consists of an input module with up to eight output modules ranging from 75 Watts dual output to 300 Watts single output. These outputs can be fitted without restriction in any combination to create a power solution with up to sixteen isolated outputs.

The NEVO+ series 300W dual slot output modules increase reliability and reduce overall system complexity and cost.

VCCM600

600W Modular Conduction Cooled AC/DC Power Series

The VCCM600 conduction cooled configurable power series combines the advantages of a modular power supply with the high reliability of a fan-less architecture and offers unrivalled performance and flexibility. The series delivers a silent 600 Watts, and up to 750 Watts of peak output power for 5 seconds, in a rugged 4” x 7” x 1.61” package.

VCCR300

300W Conduction Cooled DC/DC Power Series

The VCCR300 is a robust and highly reliable single output conduction cooled power supply delivering up to 300 Watts in a compact 7.43” x 4.6” package. Its unrivalled 1” low profile ensures easy integration in virtually any orientation, providing system designers with great flexibility and space-saving advantages. The series offers a wide DC input range of 33.6-160V_DC and 12V/24V/36V/48V standard output options.

VCCS300

300W Conduction Cooled AC/DC Power Series

The VCCS300 is a scalable single output conduction cooled power supply. It is the ultimate power solution for applications where rugged reliability, high efficiency, silent operation and BF rating are important factors. The series delivers 300 Watts of continuous output power in a rugged and miniature 4” x 2” x 1.61” package.

Power Supply Simplified - Vox Power

Learn About Our Manufacturers

Recent Articles

Related Articles

Get in Touch

Send Us a Message

Members of:

Contact Us